Configure Token Sheet

Ethos Token Sheet

Part #	Description	Token
5044-FEA-APP-008	The reader will ignore all 13.56MHz (high frequency) credentials, but will still respond to 13.56MHz configuration cards	c-JyqPSrx6
5044-FEA-APP-009	The reader will ignore 13.56MHz (high frequency) encrypted credentials, but will still respond to 13.56MHz configuration cards and unencrypted card serial numbers	c-gGEoN76S
5044-FEA-APP-013	The reader's 13.56 MHz will ignore card serial numbers and NFC, and only read LEAF credentials	c-zpPgdM8b
5044-FEA-APP-019	The reader's 13.56 MHz will ignore card serial numbers, and only read LEAF credentials and encrypted NFC credentials	c-n2ankchP
5044-FEA-APP-021	The reader's 13.56 MHz will read all credential types (LEAF, App based BLE/NFC, and card serial numbers)	c-exJSmuAA
5044-FEA-CSN-010	Enables a 32 bit card serial number format common to some legacy access readers (32 bit MSB)	c-RVUWkegY
5044-FEA-FIL-001	Eliminates any bitstream filters ignoring certain low frequency credentials	c-nv95HH8r
5044-FEA-OSDP-018	Enable OSDP with Auto-detect Baud = 9600 Address = 0	c-ejsQmSnJ
5044-FEA-LED-015	Turns the idle light to red	c-32dJHFBo
5044-FEA-LED-018	Turns the idle light to blue	c-Pti7MVYF
5044-FEA-LED-002	Turns the idle light to amber	c-t2TkCcAz
5044-FEA-LED-019	Turns the idle light to magenta	c-4xOrEbWA
5044-FEA-TMP-002	Disable Tamper	c-zc1t6mHt
5044-FEA-TMP-001	Enable Tamper	c-XJymNsp6
5044-FEA-KP-001	Turn Keypad LEDs ON	c-oiBWT8Se
5044-FEA-KP-001	Turn Keypad LEDS OFF	c-PGhOPa8s

Part #	Description	Token
Apex Enable Buzzer	Turn on the beeper/buzzer on Apex readers.	c-NA4QLdk2
Apex Disable Buzzer	Turn off the beeper/buzzer on Apex readers.	c-dMTiXXNn
Apex Reset to Autodetect	Reset the reader to OSDP Autodetect/Wiegand mode.	c-xRsEjkZL
Apex OSDP Address 0	Set the OSDP address to 0	c-DOuGrfY7
Apex OSDP Address 1	Set the OSDP address to 1	c-uEdAQRVy
Apex OSDP Address 2	Set the OSDP address to 2	c-Ox5Pdvqn
Apex OSDP Address 3	Set the OSDP address to 3	c-jDYvCdWL
Apex OSDP Address 4	Set the OSDP address to 4	c-Xsd2XQCE
Apex 4 Bit Keypad	Set the keypad to 4 bits.	c-YZmYSTv3
Apex 8 Bit Keypad	Set the keypad to 8 bits.	c-v8W46Tzj
Apex 26 Bit Keypad	Set the keypad to 26 bits.	c-czq0yfiQ
Apex LED Red	Change the idle LED to red.	c-euDLpMaq
Apex LED Green	Change the idle LED to green.	c-oeN6R6KS
Apex LED Blue	Change the idle LED to blue.	c-JOL8knba
Apex Enable Prox	Turn prox or low frequency credentials on.	c-3Jsb1zkE
APEX Disable Prox	Turn prox or low frequency credentials off.	c-YEmbT8vN
APEX BAUD RATE 9600	Set the OSDP baud rate to 9600	c-jTQZddBQ
APEX BAUD RATE 57600	Set the OSDP baud rate to 57600	c-8hLsOR29
APEX BAUD RATE 115200	Set the OSDP baud rate to 115200	c-OetHj3H0
APEX Enable Tamper	Turn on tamper readings	c-WSUXKma0
APEX Disable Tamper	Turn off tamper readings	c-t265Qkps
APEX Enable HF	Turn on high frequency credentials	c-nrMmLWKa
APEX Disable HF	Turn off high frequency credentials	c-LmsiZ1hx

Was this article helpful?

Give feedback about this article